HomeGuides
Log In
Guides

How to connect DJI P4RTK or DJI P4Multispectral with DJI D-RTK2 base in UgCS for DJI

  1. Turn on the drone, remote controller, and base station;
  2. Connect the Android device to RC and run UgCS for DJI;
  3. Open Menu in UgCS for DJI and tap on RTK Settings;
975
  • Enable RTK
975
  • Select DJI base station in RTK source settings
975
  1. Tap on the Link base station;
975
  • When this window appears on the screen, press the linking button on DJI RTK base station
975
  1. The base station is linked and the aircraft relinking confirmation window appears. Tap "Ok", then press the link button on the aircraft;
975
  • When you see this window press the linking button on the aircraft
975
  1. Check RTK Settings for status:
  • Now the base station is connected, but RTK is not in FIX mode. Some time is required to get RTK FIX mode.
975
  • RTK in FIX mode:
975 975 975