Connect Your Drone

DJI Drones

Use the direct UgCS Desktop and DJI Pilot 2 connection (recommended):

1. Ensure the computer and the RC are connected to the same Private WiFi network;
2. Use DJI Cloud Services to connect two applications as shown in this guide - https://manuals-ugcs.sphengineering.com/docs/connecting-dji-pilot2-to-ugcs;
3. Turn on the drone – the drone should now be visible in UgCS Desktop.

Other connection means will be discussed later.

Other Drones (Ardu/PX4)

Follow these instructions depending on your autopilot::

1. Ardupilot: https://manuals-ugcs.sphengineering.com/docs/first-time-vehicle-connection;
2. PX4 - https://manuals-ugcs.sphengineering.com/docs/first-time-vehicle-connection-1;
3. If you have Herelink - https://manuals-ugcs.sphengineering.com/docs/how-to-connect-ugcs-to-herelink.