HomeGuides
Log In
Guides

How to connect Yuneec H850 and UgCS

Yuneec H850 can be connected to UgCS in the following steps:

  1. Enable mobile hotspot on the remote controller of the drone;
  2. Connect to the hotspot from the PC running UgCS Desktop;
  3. Modify the PX4 VSM configuration file by adding the following lines
connection.tcp_out.1.port = 5790
connection.tcp_out.1.address = 192.168.242.2
  1. Restart and open UgCs Desktop
  2. The drone should be connected as a PX4 vehicle