---
updatedAt: 2025-11-12T01:20:43.000Z
agentTools:
  projectIndex: https://manuals-ugcs.sphengineering.com/llms.txt
---

# How to connect DJI RTK by NTRIP

## Connecting DJI Phantom 4 RTK with UgCS for DJI

NTRIP SETUP SCHEME

![900](https://files.readme.io/08d04e3-900px-Scheme.png "900px-Scheme.png")

1. Open UgCS for DJI app and in the Menu choose RTK Settings.

![900](https://files.readme.io/abc6971-900px-RTK_Settings.jpg "900px-RTK_Settings.jpg")

2. Switch on the "Enable RTK" check box and select and tap "RTK source".

![900](https://files.readme.io/a49cca0-900px-1Enable_RTK.png "900px-1Enable_RTK.png")

3. Select "Custom network service".

![900](https://files.readme.io/b3330ec-900px-CustomNetworkService.jpg "900px-CustomNetworkService.jpg")

4. Enter RTK Server address, port, password, and mount point.

![900](https://files.readme.io/c0f25a4-900px-NTRIP1.png "900px-NTRIP1.png")

![900](https://files.readme.io/cbb3ce9-900px-NTRIP2.png "900px-NTRIP2.png")

5. When UgCS for DJI is connected to the RTK the green NTRIP icon will be displayed in the top left corner.

![900](https://files.readme.io/2316a1f-900px-UgCS_Rtk_connected.png "900px-UgCS_Rtk_connected.png")

## How to setup RTK network service

1. Go to the public NTRIP casters webpage, e.g. <http://youcors.com/>.\
   1.1 Create a Mount point and select a server with the lowest latency.

![900](https://files.readme.io/9f15b04-900px-YouCors.png "900px-YouCors.png")

1.2 Create a Client for the Mount point.

![240](https://files.readme.io/f0c0844-Create_Client.png "Create_Client.png")

2. Open the mobile application of the RTK base. Add created NTRIP Client address, Port and Password, and Mount point name.

![880](https://files.readme.io/d156e37-RTK_base_app.png "RTK_base_app.png")

3. Configure RTK base if needed.

![866](https://files.readme.io/5782317-Rtk_base_settings.png "Rtk_base_settings.png")